FXO-08 Technical Manual EN-V2.0a
40
the IP address of the WAN/LAN port by
following steps:
1.
You can get a PSTN line and
connect to the L1 FXO port.
2.
Use another PSTN phone to dial
the PSTN number (in step 1you
connected on FXO-08), you will
hear a second dial tone or greeting
(please dial extension number).
3.
Press #126# on the phone set,
and you will hear an IVR
announcing the current IP address
of the WAN port.
4.
Press #120# on the phone set,
and you will hear an IVR
announcing the current IP address
of the LAN port.
Built-in Call Hold Music
System built-in music of call hold, you
can Enable/Disable this feature.
DTMF Duration
Specify the DTMF tone duration.
DTMF Interdigit Time
Specify the interval of DTMF digit
Ring Time Limit ( 10~600sec )
(FXS only)
NA
Loop Current Drop Duration detection
(0:disable, 100~1000ms )
Specify the duration (100~1000ms) of
loop current drop detection, 0 for
disable. This feature is used when the
FXO-08 connected with PSTN or PABX
extension line that supports “Loop
Current”. When the PSTN or PABX site
disconnects, the system will send
Specific duration voltage to 0 for FXO
port and make the FXO port auto
disconnect the call.
FXS Voltage Drop (FXS only)
NA
ping ip to keep alive network
Specify the IP for pinging to make sure
the network keeps alive.
ping timer(sec)
Specify the interval of ping timer(sec)