FXO-08 Technical Manual EN-V2.0a
11
3.2 Network Configuration
The following instructions will explain the configurations for setting up the WAN
port of the FXO-08. There are in total three methods of connections: Static IP,
DHCP and PPPoE.
Note:
You can retrieve the IP address of the WAN port by following steps:
1.
You can get a PSTN line and connect to the L1 FXO port.
2.
Use another PSTN phone to dial the PSTN number (in step 1you connected on
FXO-08), you will hear a second dial tone or greeting (please dial extension
number).
3.
Press #126# on the phone set, and you will hear an IVR announcing the
current IP address of the WAN port.
4.
Press #120# on the phone set, and you will hear an IVR announcing the
current IP address of the LAN port.
3.2.1 WAN Setting
The table shown below describes the configuration items for 3 connection types
of network (Static IP, DHCP and PPPoE).