FXSO H.323 Gateway User Manual
Document Ver.: 2.1a
Release Sep., 2003
Copyright (c) 2002 Welltech Computer Co. Ltd.
68
Note:
1. This is for 3702, for 3701 model, there are only line1 and line2
command.
2. Line1~Line4 number must follow the prefix number if device is
configured as
Gateway Type
. For example, if prefix number is 999,
then the line1 & line2’s number are 9991 & 9992.
3. If Gateway is configured as
Terminal Type
, each line will register to
GK with it’s own number, prefix number is not needed.
4. No matter in GK or P2P mode, user only needs to dial line number to
reach local port.
For example, in P2P mode, user wants to dial from
FXS TEL1 to FXO Line1, only need to dial number of line2.
-alias
H.323 ID. If in gatekeeper mode, this h.323 ID must be
different from others who are registering to the same
gatekeeper.
-display
An addition name for special application if callee needs this r
to recognize in called site.
-gkdis
set auto discovery function on or off. If this function is enabled
and IP address of GateKeeper is set as 255.255.255.255,
LAN Phone will multicast to search a GateKeeper on network
with configured GateKeeper name (please refer to -gkid); if IP
address of GateKeeper is set, before LAN Phone register to
the assigned GateKeeper, it will send out GRQ(GateKeeper
Request) message with configured GateKeeper name to
GateKeeper first.
-gkid
set GateKeeper name for GateKeeper discovery. When
Gateway send out GateKeeper discovery message will
search GateKeeper with this GateKeeper name. (please refer
to -gkdis)
-rtp
to allocate RTP port range—NOT RECOMMENDED. This
may be used when RTP port range conflicts with Firewall
policy. (each port of Gateway use 2 RTP ports)
-ttl
to set timer for TTL(Time To Live). Gateway would send RRQ,
with keepAlive, to gatekeeper periodically according to TTL
timer.
