Postmate 3 User’s Manual
- 22 -
3-10 Thickness Sensor
This function prevents double or mass feeding.
1. Press the Thickness Sensor button.
2. It will feed on paper and stop at the digital sensor for a second.
3. The thickness of the paper will be shown on the panel in digital value and paper comes
out. Check if LED is on.
4. Press Start/Stop button and it works. If double or multiple papers feed at the same
time, machine will stop before the paper goes into folding roller and Error #5 will be
displayed on the panel.
Reference
Whenever you change the paper, you are requested to off and on the Thickness
Sensor button since the value is different depending on papers.
Important
The feeding system of Postmate 3 is FRR (Friction Reverse Roller), which
prevents the double feeding by reserve roller. However, there are many
possibilities of double or multiple feeding since Postmate 3 processes 100
sheets per minute. So, aligning the paper before feeding will give you more
stable feeding.
Reference
This digital value won’t change by turning on/off the power.
3-11 Use of “Jam Free” Function
In case the paper is jammed at folding roller or press roller, machine will stop with
error message. Then, press Jam Free button and machine will run except feeding
unit. If it is still not possible to remove the jam, Please refer to Chapter 4.
