Postmate 3 User’s Manual
- 20 -
3-4 Count Setting
You can set the number of jobs to be done.
For example, if you set count on 100, machine will stop operating when the job
reaches 100. Press Start/Stop button again, machine will start to fi nish another
100.
1. Press Count button and the LED will light on
2. Select job volume by using - / + button.
* If you press the button on by one, count will change by 1 and if you press
for more than one second, the count will change by 10/second.
3. Press Set button and check the number displayed on the panel.
* You can set the counter up to 250 sheets.
3-5 Fine Adjustment of Folding Position
You can adjust the fold setting in the following cases.
1. Fine adjustment is required from the standard folding type.
2. In case the folding is slightly different.
Reference
If the folding is slightly off from the desired position, please check the
following possible causes.
a. Incorrect fold setting
b.
Machine
clearance
c. Incorrect position of fold cassettes
d. The FRR or the fold rollers are worn out
Important
Folding position of upper cassette and lower cassette will be displayed on
the middle of the panel. For example, if 99 above and 80 below means the
folding stopper will move/fold 99mm on upper cassette and 80mm on lower
cassette. Therefore, if you like to work 1st folding longer, increase the value
of 1st fold and if you like to work 2nd folding shorter, decrease the value of
2nd fold.
If you press Start/Stop button before pressing Set/Store button, the job will
be back to the prior setting.
