WELLSYSTEM SPA COMPLETE, Инструкция по эксплуатации и монтажу

Страница: 37 / 56

Cleaning and maintenance
06/2021 1026902-00 Operating instructions – 35/52
INSTRUCTIONS:

To ensure thorough disinfection, always adhere to the
contact time specified for the disinfectant. Follow the
manufacturer’s instructions for use.

After the prescribed contact time, remove any remaining
residues of the cleaning/disinfecting
agents.

For this, use disposable paper tissues.

Carry out a visual inspection. Repeat the cleaning pro-
cedure if you find dirty areas or residues of the clean-
ing/disinfecting
agent.

Carry out a further visual inspection.
NOTE!
Only use the wipe cleaning/disinfection method on the con-
trol unit and the ‘AROMA outlet’. Do not spray!
5.2.2 Cleaning the surfaces
CAUTION!
Do not rub dry – danger of scratching!
Failure to observe this invalidates all guarantee claims.
–
For fast, hygienically flawless cleaning of surfaces, use
only the specially developed mikrozid
®
sensitive rapid
disinfectant.
– Other cleaning agents, especially concentrated disin-
fectants or solvents (e. g. Lysoform, ethyl alcohol or
other liquids containing alcohol) must never be used for
cleaning.
– Remove fingerprints, cleaning residues and other soil-
ing carefully.
Plastic surfaces
To clean the painted and unpainted plastic surfaces, it is best to simply use
warm water and a leather cloth. Never use alcohol-based aggressive cleaning
agents or essential oils. These may lead, in the long term, to damages not
covered by the warranty.
During cleaning the rubber seals may cause slight black colouring of the
leather cloth for production-related reasons.
Avoid causing damage to the acrylic glass and plastic surfaces.
–
Remove rings, wristwatches, bracelets etc. before beginning cleaning
work.
NOTE!
If you use cleaning agents, cleaning agent residues should
be removed to protect the surfaces.