17
1. Switch the Body Lifter on with the power
button (hold the
multi-function button
under
the silicone cover
on the right side
of the
device for about 3 seconds). The
default
setting
of the display shows
SLIM
(RF
programme "Slimming") plus
ARM
(body region
“Arms”) plus L (intensity level “Low”).
2. First of all, select the body area you want to
treat. You can choose between 6 body areas:
ARM (arms), WAI (waist), ABD (abdomen),
BUT (buttock), HIP (hips), LEG (legs) by
shortly pressing (1 s) the
right multi-function
button
per body area. The display shows the
treatment time simultaneously that matches
optimally with the body area chosen.
3. Secondly, select the RF programme you would
like to use to treat the chosen body region
with. Press the
multi-function button
under
the silicone cover
on the left side
of the
device shortly (1 s) per programme. STRET
(“Stretching") is the third RF programme.
4. Thirdly, select the intensity level for the
programme you have chosen. Press the
left
multi-function button
again shortly (2 s) per
intensity level. You can choose between 3
intensity levels: L “low”, M “medium”, H “high”.
5. Start the treatment by shortly pressing (2 s)
on the
right multi-function button
.
6. The integrated timer begins to count down.
7. You will recognize the programme activation
through the pulsing squares displayed in
the intensity and operating status icon in the
bottom center of the display area.
8. You can interrupt and re-start the treatment
programme by pressing the
right multi-
function button
shortly (2 s) again.
9. Switch the Body Lifter off after the treatment by
pressing the
right multi-function button
for
about 3 seconds.
10. At the end, clean the treatment heads carefully.
Wipe leftover gel with a damp cloth or sponge.
Do not use running water to clean the device!
