INSTALLATION
NOTE:
DO NOT discard
the carton or other packing
materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation.
Refer to
SHIPPING DAMAGE
CLAIM PROCEDURE
on the
inside front cover of this
manual.
WARNING:
RISK OF
PERSONAL INJURY
Installation procedures must
be performed by a qualified
technician with full knowledge
of all applicable electrical
codes. Failure can result in
personal injury and property
damage.
UNPACKING & INSPECTION
Carefully remove the appliance from the carton. Remove all
protective plastic film, packing materials and accessories from the
appliance before connecting electrical power or otherwise performing
any installation procedure.
Carefully read all instructions in this manual and the
Installation
Instruction Sheet
packed with the appliance before starting any
installation.
Read and understand all labels and diagrams attached to the
appliance.
Carefully account for all components and accessories before
discarding packing materials. Store all accessories in a convenient
place for later use.
COMPONENTS
1 set
ADJUSTABLE 6” LEGS
1 or 2 set. REMOVABLE DRAWER GLIDES
1 or 2 ea. REMOVABLE DRAWER FRAME(S)
1 or 2 ea. PRODUCT PAN(S)
1 or 2 ea. BAFFLE ASSEMBLY(S)
SETUP
Setup the appliance only on a firm, level, non-combustible surface.
Verify local codes for requirements. Concrete, tile, terrazzo or metal
surfaces are recommended. Metal over combustible material may not
meet code for non-combustible surfaces.
Install provided 6” legs or optional legs or casters. Verify that the unit
sits firmly ON ALL FOUR LEGS. With a spirit level, check that the
appliance is level front-to-back and side-to-side. With the adjustable
legs, adjust as required to level the appliance. All four legs must be
adjusted to firmly contact the floor in order to prevent tipping.
Refer to the
Installation Instruction Sheet
for required clearances.
Maintain required clearances between the appliance and adjacent
combustible surfaces.
Verify baffle(s) properly installed.
Install removable drawer glides, drawer frame(s) and product pan(s) as
required.
Avoid storing flammable or combustible materials in, on or near the
appliance.
4
SCREW INTO
CABINET
MOUNTING
HOLES
TURN TO
ADJUST
HEIGHT
046
p/n
3070
33
O
p
M
Tortilla Chip
W
a
rmer
