Wells M200 Series Скачать руководство пользователя страница 8

Страница: 8 / 40

M-Z

t-I

rme

NOTE:

DO NOT discard

the carton or other packing

materials until you have
inspected the appliance for
hidden damage and tested it
for proper operation. Refer to
SHIPPING DAMAGE CLAIM
PROCEDURE on the inside
front cover of this manual.

WARNING:

RISK OF INJURY

Installation procedures must

be performed by a qualiﬁed
technician with full knowledge

of all applicable electrical and
plumbing codes. Failure can
result in personal injury and
property damage.

CAUTION

FIRE HAZARD

Avoid storing ﬂammable or

combustible materials in, on or
near the appliance.

IMPORTANT:

For warmers

installed in plastic counter
tops, the counter material
must be protected from the
heat of the warmer in order to
prevent discoloration and/or

deterioration. Wellsloks are

not suitable for this purpose.
The installer should contact
the manufacturer or distributor
of the countertop material for

speciﬁc instructions.

IMPORTANT:

Wellslok

Extension Kits must be
used ONLY with UL Listed
warmers approved for
installation in wood counter
tops. Refer to the Installation
Instructions provided with the
warmer.

UNPACKING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective

plastic ﬁlm, packing materials and accessories from the Appliance

before connecting electrical power or otherwise performing any
installation procedure.

Carefully read all instructions in this manual and the Installation

Instruction Sheet packed with the appliance before starting any

installation.

Read and understand all labels and diagrams attached to the
appliance.

Carefully account for all components and accessories before discarding

packing materials. Store all accessories in a convenient place for later

use.

INSTALLATION NOTES

Installation and start up of built-in warmers MUST be performed
by an authorized installation company.

It is the responsibility of the installer to verify that this warmer

installation is in compliance with the speciﬁcations listed in this
manual and on the speciﬁcation sheet provided.

3. It is the RESPONSIBILITY OF THE INSTALLER to check with

the authority having jurisdiction, in order to verify that this warmer
installation is in compliance with local code requirements.

Water supply and drain installation must meet all applicable
local, state and federal plumbing codes and ordinances.

5. Refer to Installation Instructions included with the warmer for

Underwriters Laboratories conditions of acceptability, electrical
requirements and other installation concerns.

BUILT-IN WARMERS

1. This is a GENERAL GUIDE. For speciﬁc cutout dimensions

and other installation details, refer to the Installation

Instructions supplied with the warmer.

Cutout dimensions for warmer units and control panels are

listed on the Installation Instructions provided with the warmer.

NOTE:

Cutout dimensions are different for auto-ﬁll and non auto-ﬁll

units, control panels, and for wood and metal counters. Verify the

dimensions are correct for the installation before making the cutout.
Speciﬁc cutout speciﬁcations are list on the installation sheet included

with the unit.

RIS

Installation

NOTE:

DO NOT discard

UNPACKING & INSPECTION

INSTALLATION

FIRE

Avoid storin

Содержание M200 Series









































Результаты поиска

Содержание M200 Series

Отзывы:

Похожие инструкции для M200 Series

Бренды по названию

Популярные бренды

Wells M200 Series, Руководство пользователя

Результаты поиска

Содержание M200 Series

Отзывы:

Похожие инструкции для M200 Series

Бренды по названию

Популярные бренды