Wells GAS GRIDDLES, Руководство по эксплуатации

Страница: 6 / 18

4
INSTALLATION INSTRUCTIONS
A. UNPACKING AND INSPECTION
1. Carefully remove the GRIDDLE from the carton. Remove all protective plastic film, packaging
materials and accessories from the GRIDDLE before connecting electrical power or otherwise
performing any installation procedures.
NOTE: DO NOT discard the CARTON and other PACKAGING MATERIAL until you have
inspected the warmer for hidden damage and tested it for PROPER OPERATION.
Refer to
SHIPPING DAMAGE CLAIM PROCEDURE on page 1 of this manual.
2. Carefully read all instructions in this manual and the INSTALLATION INSTRUCTIONS packed with
the warmer before starting installation of this warmer. READ AND UNDERSTAND ALL LABELS
AND DIAGRAMS ATTACHED TO THE GRIDDLE.
3. Carefully account for all components and accessories before discarding packing materials.
Store the accessories in a convenient place for later use:
B. SET-UP
1. Setup the griddle only on a firm, level surface. Non-combustible material (e.g. metal, terrazzo) is
recommended.
2. Maintain clearances between the appliance and adjacent combustible surfaces. Avoid storing
combustible or flammable materials near the appliance.
3. Legs must be properly installed and the griddle levelled
. If the griddle is to be moved, use care to
avoid damage to the legs.
4. Install grease drawer and splash guard prior to using griddle.
C. GAS HOOK-UP
NOTE:
Manufacturer’s warranty is in effect only when the Griddle is installed by qualified
personel in accordance with the owner’s guide and local ordinances, or, in the absence of local
ordinances, the NFPA #54 and the National Fuel Gas Code, ANSI Z223.1 (current edition).
Wells Manufacturing is not liable for any damage resulting from failure to comply with this notice.
When servicing is required to correct any electrical or temperature complaint, always refer
service to a Wells Factory Authorized Service Agency.
See Wells form# 37000 for a complete listing of factory authorized service agencies.
Natural gas and LP gas can be extremely dangerous if allowed to
leak into the building.
FOR YOUR SAFETY - WHAT TO DO IF YOU SMELL GAS
Shut off this appliance at the main gas valve. Do NOT try to light any appliance.
Do NOT touch any electrical switch. Do NOT use a phone in your building.
Immediately call your gas supplier or local fire department from a neighbor’s
phone. Follow the gas supplier’s or fire department’s directions.
For your safety, do not use or store gasoline or any other flammable vapor or liquid
in the vicinity of this or any other appliance.