Weller WX1, Руководство по эксплуатации

Страница: 25 / 53

8-18 WX 1
DE
EN
FR
IT
ES
PT
NL
SV
DK
FI
GR
TR
CZ
PL
HU
SK
SL
EE
LV
LT
Fig. 10
Keys Operation Function
Control key 1, 2 Briefly press key 1, or 2 once
The fixed temperature (24/25)* becomes the
active set-point temperature (22)*.
- Scroll within the Parameter menu
Press and hold down key 1, 2
for 3 sec.
− The active set-point temperature is saved as
the fixed temperature under the key being
pressed (1, 2).
Press and hold down keys 1
and 2 simultaneously
− Channel (9)* is closed or opened
Press and hold
down keys 10 and 1
or 10 and 2
Keys 10 and 1 or 10 and 2
simultaneously
− Open Parameter menu
Press and hold
down keys 2 and 4
or 1 and 4
Keys 2 and 4 or 1 and 4
simultaneously
−
Open Parameter menu
Selection key 4 Briefly press key 4 once
− Select auxiliary device, this being a
requirement for opening the parameter
settings of the auxiliary device (e.g. WFE)
Selection key 10 Press and hold down keys 10
for 3 sec.
− Select auxiliary (WFE front port)
−
The set-point temperature window opens
Key 4 Briefly press key 4 once
−
Exit parameter menu
Turn-and-click
wheel 5
Move your finger over the
turn-and-click wheel
− Select/set value
−
Navigate within a menu
Click left or right
−
The set-point temperature window opens for
the soldering tool connected on the left/right
Enter key 4 Briefly press key 4 once
− Confirm value/selection
*) see also overview diagrams (Fig. 7 / Fig. 8, Page 10).
6.2 Example 1:
adjusting the temperature
1. Press and hold down the required selection key (10) for 3 sec.
The display changes over to the set-point temperature
(see Fig. 10).
2. Set the required set-point temperature with the turn-and-click
wheel (5).
3. Confirm the value with the Enter key (6).
4. Exit the parameter menu with key (4).
Note If no entry is made for 10 seconds, the parameter menu is exited
automatically.