Weller PU 81, Руководство по эксплуатации, Страница: 7 / 10

10
3. Starting
Assemble soldering iron rest (see exploded drawing).Place
the soldering iron in the safety rest. Insert the soldering iron
plug into the connection bush (5) of the control unit and lock
by turning to the right. Check that the power supply corre-
sponds to the specifications on the name plate and that the
power switch (1) is in the OFF position. On version that can
be switched, set the voltage on selection switch (8) (set in
the factory to 240 V ). Connect the control unit to the power
supply. Set the temperature at the rotary potentiometer (3).
Switch on unit at the supply switch (1). Green LED (2) will
illuminate. This LED functions as the optical regulator.
Constant illumination means that the system is overheating.
The blinking light signals that the operating temperature has
been reached.
Maintenance
The transition between the heating element / sensor and the
tip of the soldering iron may not come in contact with dirt,
foreign particles or become damaged, since this affects the
precision of the temperature control.
4. Equipotential bonding
The various circuit elements of the 3,5 mm jack bush (4)
make 4 variations possible:
Hard-grounded:
No plug (delivery form)
Equipotential bonding
(impedance 0 ohms):
With plug, equalizer at center
contact
Potential free:
With plug
Soft-grounded:
With plug and soldered
resistance.Grounding via set
resistance value.
5. Instructions for use
For initial heating, coat the selective tinnable tip with solder.
This removes any oxidation or dirt on the tip which may have
occurred during storage. During pauses between soldering
and before storing the soldering iron, ensure that the tip of
the soldering iron is well coated. Do not use aggressive flu-
xing agents.
Note:
Always ensure the proper position of the soldering iron
tip.
These soldering irons have been adjusted for an average-
size tip. Deviations can occur due to exchanging of the tip or
using other tip designs.
6. Accessories
T005 29 180 99 Soldering iron set WP 80
T005 29 161 99 Soldering iron set WSP 80
T005 33 131 99 Soldering iron set MPR 80
T005 29 187 99 Soldering iron set LR 21, antistatic
T005 29 188 99 Soldering iron set LR 82
T005 33 133 99 Soldering iron set WTA 50
T005 27 028 99 Preheating plate WHP 80
T005 29 179 99 Soldering iron set WMP
WS 81:
T005 25 032 99
Thermal insulating unit WST 82KIT1
T005 25 031 99 Thermal insulating unit WST 82KIT2
7. Scope of supply
WS 81
Control unit
Soldering iron WSP 80
Power cable
Soldering iron rest
Jack
Operating Instructions
Safety Information
WS 51
Control unit
Soldering iron LR 21
Power cable
Soldering iron rest
Jack
Operating Instructions
Safety Information
PU 81
Control unit
Power cable
Jack
Operating Instructions
Safety Information
Illustration: Circuit diagram, see Page 50
Illustration: Exploded view, see Page 51 + 52
Subject to technical alterations and amendments!
See the updated operating instructions at
www.weller-tools.com.
English
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com