welldana 34-180138, Инструкция по установке и эксплуатации

Страница: 61 / 76

For users
- 4 -
2. Operations
2.1. Notice before using
①
The user is advised to start the water pump before the heat pump, and turn off the
heat pump before the water pump for long life circle.
②
Check firstly for any water leakage of piping connection, then power on, press the
ON/OFF button of the heat pump, and set suitable temperature.
2.2. Operation instructions
Symbol Designation Operation
Power ON/OFF Press to power on or off the heat pump
Mode Press to select Smart/Silence mode
Up/ Down Press to set desired water temperature
Note:
①
You may set the desired water temperature from 18 to 40
℃
.
②
The on the right shows the inlet water temperature. The on the left shows the
set temperature by pressing or button.
③
After you turn on the heat pump, the fan will start to run in 3 minutes. In another 30
seconds, the compressor will start to run.
④
During heating, the will be light.
2.2.1. Mode selections
①
will be light as standard when you turn on the heat pump.
②
Press the button to enter the Silence mode, the will be light.
Press the button again to exit and enter the SMART mode.
2.2.2. Compulsory defrosting