Wellav IFQ332, Руководство пользователя

Страница: 14 / 23

IFQ332 User Guide
14
QAM Output Parameter Setting > In this page, you can enable how many channels you want
to use and input the Frequency (KHz), Bandwidth (M), Constellation and Symbol Rate (KBaud)
to have an output. Here is the range parameter for the said info
Parameters Range
Frequency 108000 to 960000 KHz
Bandwidth 6, 7, 8
Constellation 16, 32, 64, 128,256
Symbol Rate @6M Bandwidth: 4400 to 5217 KBaud
@7M Bandwidth: 4400 to 6086 KBaud
@8M Bandwidth: 4400 to 6956 KBaud
You can also set the RF level at range of 0 o 23 as shown in the image below.
3.5 Service Configuration
Service Configuration have four tabs namely Source, Service edit, SI Setting and PID
Transmission. Here you will be able to output services from TSIP Input to QAM Output. To get
here, once you login on the Management GUI. Look for the Service Configuration on the Main
Navigation Men
u at the left. Click the “Service Configuration” and it will show you the 32 QAM
channel. Select the channel you want to configure and
you will be on “Source” tab.