1.
In on-hook state, press
MUTE/RING
key, LCD display
RING 01
.
2.
Press
▲
or
▼
key to select ring tone.
Besides, you can also press
MUTE/RING
key repeatedly to select the ringer.
ONE-TOUCH MEMORY
Storing a number into one-touch memory
1.
In on-hook state, pre-dial the desired number or review the incoming or outgoing list for the
desired number to store.
2. Press
SET
key, then press
M1
key to store the number.
Dial one-touch memory
In on/off-hook situation, press
M1
key to dial out the stored number. The telephone will add PABX
code ahead the number if the number is 6-digit or more than 6-digit.
HANDS-FREE VOLUME
During the hands-free mode, press
VOL
key repeatedly to adjust the speaker volume. There are 2
levels for selection between
HI
and
LO
.
RECALL FUNCTION
The recall function of
FLASH
key can support some special network service, such as call waiting, transfer
call, etc. These services require a subscription and the operations depend on the different exchanger.
PAUSE FUNCTION
If dial a number from PABX extension, press PABX number (normally “0” or “9”) + VIP/P + desired
number. When redial, need not dial PABX number and VIP/P key, just press REDIAL key.
NOTES
Please unplug telephone line when install or replace batteries.
TROUBLE SHOOTING
No voice
Check if the handset is on the phone or line is broken.
Receive only
Check if pulse or tone mode is properly set.
Battery rust or leak
Replace the batteries.
Noise
Check if the circuit is broken, change the circuit.
Check if the connector is moist or rust, change the connector.
Ring once then disconnect when receive a call. Dialing function is available
Check if connector is in a moist environment.
Check if too many extensions are used together or the quality of extension is not good enough,
change the bad extension.
Most of the functions failed
Содержание CD001
Страница 3: ...Wall mounting option LOCATION DESCRIPTION...
