5. Press
DEL
key to quit.
Note:
If the local area code only 4 digits, the last digit can be left as “-”.
After set the local area code, unit will auto-filter the area code if the incoming call number with the
first several digits as same as the local area code.
SET PABX CODE
1. In on-hook state, press
SET
key and then press
▲
key 2 times, LCD will display
SET 3 PCODE
.
2. Press
SET
key to confirm, LCD displays
PCODE --
, the first “-“flash and indicate to set the first
digit of PABX code.
3. Press
▲
or
▼
key to set the PABX code. Press
SET
key to confirm and enter the second digit
setting.
4. Following same steps to set the second digit.
Notes:
1.
If only one digit of PABX code, left the second digit as“-“.
2. If set PABX code, when dialing back incoming call or pre-dial a number, and if the number is 6
digits or more than 6 digits, the telephone will auto-add PABX code ahead the incoming number
or the pre-dialing number which is not lead by PABX code and then pause 1 second.
SET AUTO IP
In on-hook state, press
SET
key and then press
▲
key 3 times, LCD will display
SET 4 AUTO IP
.
Note:
This function is unavailable, so the users do not need to set this item.
SET DIALING TYPE
1. In on-hook state, press
SET
key and then press
▲
key 4 times, LCD will display
SET 5 P-T
.
2. Press
SET
key to confirm, LCD displays
TONE
, press
▲
or
▼
key to select
TONE
or
PULSE
.
SET ANTI-DIALING FUNCTION
1. In on-hook state, press
SET
key and then press
▲
key 5 times, LCD displays
SET 6 ALAR
2. Press
SET
key to confirm, LCD displays
ALAR OFF
, press
▲
or
▼
key to select
ON
or
OFF
.
3. Press
SET
key to confirm.
When the anti-dialing is set to ON, users who want to dial using an extension (parallel phone) via
the same line will hear a “DI-DI, DI-DI” beep continuously and will not be allowed to make a call.
SET LCD CONTRAST
1. In on-hook state, press
SET
key and then press
▲
key 6 times, LCD displays
SET 7 LCD
2. Press
SET
key to enter, LCD displays
LCD 3
, press
SET
to enter, LCD displays
LCD 3
, press
▲
or
▼
to select among 1~5 levels.
3. Press
SET
key to confirm and exit.
MUTE FUNCTION
During conversation, if you want to talk to someone else and you do not want
the phone
receiver hear your voice, press
MUTE/RING
key to mute your voice sending, LCD displays
“
MUTE
”. To recover the conversation, press
MUTE/RING
key again.
SET RINGING TONE
There are 8 kinds of ringing tone for selection:
Содержание CD001
Страница 3: ...Wall mounting option LOCATION DESCRIPTION...
