15
2.8. Problem solver
PROBLEM
CAUSE
SOLUTION
The appliance does not react
when the MODE-button is
pressed.
The receiver is in ‘OFF’ position
Place the receiver button in ‘REMOTE’ position
The receiver does not match to the
transmitter.
Execute the ‘LEARN’ procedure
The transmitter does not react
after the ‘LEARN’-procedure.
The transmitter is too far from the
receiver.
Move the antenna to a free space (the outside
of the appliance is the maximum range area)
so that the operating range is wider
The receiver emits a beep
The transmitter is positioned out of
range of the receiver for more than
1 hour.
Place the transmitter closer to the receiver, or
move the antenna of the receiver
The
receiver
beeps
repeatedly in quick tempo and
the transmitter is within the
receiver’s operating range
The receiver got overheated
The receiver has to cool down, as it will only
operate again when the temperature inside the
receiver drops beneath 50°C
The receiver beeps in slow
tempo and the transmitter is
within the receiver’s operating
range
The transmitter is positioned on a
radio-wave reflecting surface
Place transmitter on a soft, non-reflecting
surface, or place it in an upright position
The transmitter is broken
Replace transmitter
