12
© Well Straler all rights reserved
The connection of the myfire Wi-Fi
Box to your Wi-Fi Router may take
a few seconds.
When the connection is established,
the myfire Wi-Fi Box exits the
Access Point Mode (Hot Spot) and
is connected to the Wi-Fi Router.
If successful go to point “5.10
Settings of your gas fire”
If Kwik Connect is not available
follow the next steps.
5.9.1
Kwik Connect is not available
Touch the “Standard Setup” button.
If an error occurs during the
standard setup, please reset the Wi-
Fi Box (7 sec.) and start the
installation
again
from
the
beginning.