S
PECIFICATIONS
IOM-104
Page 3 of 10
APP-5
Rev: B
Last updated:
9/8/2009
1.
GENERAL
1.1 I
NTRODUCTION
We appreciate your business and your choice of Welker products. The installation,
operation, and maintenance liability for this product becomes that of the purchaser at the
time of receipt. Reading the applicable
Installation, Operation, and Maintenance (IOM)
Manual
prior to installation and operation of this equipment is required for a full
understanding of its application and performance prior to use.*
If you have any questions, please call 1-800-776-7267 in the USA or 1-281-491-2331.
Notes, Cautions, and Warnings
Notes
emphasize information or set it off from the surrounding text.
Caution
messages appear before procedures that, if not observed, could
result in damage to equipment.
Warnings
are alerts to a specific procedure or practice that, if not
followed correctly, could cause personal injury.
*The following procedures have been written for use with standard Welker parts and equipment.
Assemblies that have been modified may have additional requirements and specifications that are not listed
in this manual.*
1.2
D
ESCRIPTION OF
P
RODUCT
The Welker
Adjustable Probe is designed for use in systems where it is desirable to insert
and retract the probe while the pipeline remains pressurized. The preferred location for
installation of the probe is in a straight Section of inlet piping in that the product is well
mixed, before the flowing stream is subjected to turns and impingements that can result
in turbulent flow.
