WELDKAR INOX 1600 AC/DC, Инструкция по эксплуатации, Страница: 16 / 34

16
eng
deu
ned
3.1 Scope of delivery
The cleaning set Weldkar Inox 1600 AC/DC is delivered with the accessories of the following table in a grey
and practical transport case.
Description Specifications Quantity
Cleaning kit Weldkar Inox 1600 AC/DC _ 1
Ground cable 10 mm / 3 mm 1
Workpiece cable 10 mm / 4 mm 1
Power cable 3 m 1
Teflon handle with quick release buckle SK25 1
High-quality carbon fibre brush M10 L 1
Carbon-Fix (Teflon cover) M10 L 1
Signing-Fix (Telfon clamp for graphite anode with felt) _ Optional
Graphite anode 90° Optional
Signing electrolyte 100 ml Optional
Signing felt white Optional
Template _ Optional
Speed/Special electrolyte 500 ml 1
Copper-ceramic paste 10 ml 1
De-/mounting key _ 1
Bottle (for electrolytes) _ 1
4. Operational
Please observe the safety instructions in the chapter
Safety starting on page 4.
4.1 Putting the device into operation
The correct preparation of the unit is described
described below. The procedures for cleaning, polishing
and cleaning, polishing and signing are described in the
following sections.
1. Unpack the device.
2. Dispose of the packaging material correctly.
Dispose of the packaging material correctly.
3. Place the appliance on a flat surface in your working
area.
4. Insert the grounding cable into the connector (5)
5. Insert the workpiece cable into the connector (4)
6. Insert the power cable into the socket (8).
7. Insert the 230 V plug into a socket.
7.1 The unit is prepared.
8. Do not switch on the machine until you have carried
out the preparations have been made according to
the desired processing: cleaning, polishing or signing.