© Welding Industries Malaysia Sdn. Bhd. reserves all rights even in the event of industrial property rights. We reserve all rights of dis-
posal such as copying and passing on to third parties. Specification may vary from country to country. V1.1.06
WIM MIG 01 WARRANTY
1) General: WIM products are warranted against manufacturing defects for one (1) year following date of shipment to the origi nal
user. With exception of item listed in paragraphs 2 through 7 below.
2) Major Power Components: Main power transformers are warranted for two (2) years following date of shipment to the original
user. WIM will cover parts and labor in year one and replacement only in year two,
3) Major Power Rectifiers: Silicon diodes and power SCRs used in the welding output circuit of equipment are warranted for one
year following date of shipment to the original user.
4) Major PCB Component: Main control board will be warranted for a period of one year from the date of purchase (verified by
reference to proof of purchase).
5) Expendable Items: Primary and secondary switch contacts, cable connectors, fuses, bulbs, filter, ceramic nozzles, collets body,
handle, leads connector and trigger switch are worn or consumed in the normal process of welding or cutting and are therefore
warranted only if found to be defective prior to use.
6) Semiautomatic Item: Torch body and cable are warranted for fourteen (14) days from the date of purchase (verified by
reference to your proof of purchase).
7) Modification and Misuse: This warranty does not apply to products which have been modified in any way by any party other
than WIM: nor to products which have not been installed and operated in accordance with applicable industry standards: nor to
products which have been used other than under the usual conditions for which designed: nor to products that have not received
proper care, lubrication, protection and maintenance under supervision of competent personnel.
Use of a product after
discovery of a defect voids all warranties.
DISCLAIMER OF WARRANTIES
There are no warranties, which extend beyond the description on the face hereof, except as specifically provided in the expressed
warranties set forth above. All products are sold “as is”. WIM makes no warranties, expressed or implied, of merchantability or
fitness for a particular purpose.
WARNING
At all times, safety is an important consideration in the installation, servicing, and operation of the product, and skilled,
qualified technical assistance should be utilized at all times. Specific recommendations are included in instruction
manual. The users are reminded to read carefully the steps before carrying out welding jobs.
(
保证书
)
1)
一般：除了以下第二至第七段所注明之项目，所有
WIM
之产品对制造上之不良享有一年之使用保证，保用期限由交货至原
有使用者之日期算起。
2)
主要的确电力元件
:
主变压器有二年的保证
,
由交货至原有使用者之日算起。在第一年
,WIM
所保证的包括零件更
换和工钱
,
在第二年只保证零件更换。
3)
主要的电力整流器
:
在焊接输出的线路之硅二极体及
SCR
有一年的保证
,
由交货至原有使用者之日算起。
4)
主要的电路板元件
:
主控制板从购买日期算起有一年保证。
(
由购买证据所鉴定
)
5)
消耗品：开关接触器、电缆连接器、保险丝、灯泡、过滤器、陶瓷喷咀、筒夹、把手、插座和触发开关在正常焊接或切割
中会磨损或消耗，因此只有用前的不良可享有保证。
6)
半自动项目：焊枪体和电缆从购买日期算起有十四天保证。
(
由购买证据所鉴定
)
7)
修改和误用：这保证不含包以下情况之产品：
(a)
经过
WIM
以外的团体或个人之修改，
(b)
没有按照通用的工业标准来安装和
操作，
(c)
没有在原有设计的寻常情况下使用，
(d)
没有在可胜任的人监督下给予适当照顾、润滑、保护和保养。
保
证
之
声
明
除了特别提供更新的明确说明保证，任何超出於此说明范围之情况皆不获保证。全部产品照原样出售。对於其他特殊用途
WI
M
一概不作保证。
注
意
无时无刻，在安装、维修和操作本产品时，安全是一项很重要的考虑因素。应该时常利用合格的技术援助。明确的建议已包
含在附上的使用自手册里。在还没进行焊接工作之前使用者要记得仔细读预防步骤
.