© Welding Industries Malaysia Sdn. Bhd. reserves all rights even in the event of industrial property rights. We reserve all rights of disposal
such as copying and passing on to third parties. Specification may vary from country to country.
V1.1.07
16
10-0
SAFETY OBSERVATION ( Cont’d)
Handing
Remove cylinder before lifting
Handing
Do not lift using handle
Handing
Lift the unit correctly
Heat
Do not burn yourself!
Wear gauntlets and use tongs
Glare
Wear your headshield ( or face
screen) and screen the welding
area
Fume
Ventilate the welding area to
prevent build-up of gas and
fume
Dress
Dress correctly when welding and
preparing the weld
Dust
Note: Use only DRY air at a pressure not
exceeding 2 bar
Wear goggles and mask when
removing dust with an airline
Fire
Before commencing welding,
clear the flammable area
Electrical
Do not work with cover off
Leave it to the experts
Electrical
415/230 A.C is supplied to the
p.c.b Isolate unit before
removing covers of p.c.b
Electrical
Do not allow leads to lie in oil,
water or corrosive liquid or
extend them with extension
leads-fit a longer cable
Torch lead
draped over
shoulder
Dark,
high
necked
overall
with
buttoned
cuffs
Correct Grade
of glass
(Ew9, 10&11)
Clear Goggles
for chipping
and wire
brushing
Leather gauntlets
