5. On Screen Display
<Fig5-1. Operating OSD display position>
,
⑤
WB MODE
ATW
Auto Trace White Balance
Indoor Preset (3200
°
K)
Outdoor Preset (5400
°
K)
Manual WB mode
AWC
One Push mode
ZOOM
DISPLAY
CAMERA
ID
①
OSD Format
DESCRIPTION
②
FUNCTION
Focus Mode
Non display
MF
Auto Mode
Manual / Push_Auto Mode
Back Light
Back Light OFF
Back Light ON
④
Shutter Speed
Normal Shutter
( NTSC:1/60 PAL :1/50 )
1 / 125
.
.
.
.
1 / 1 0, 0 0 0
28 v ariable steps.
Non display
Non display
BL
IN
OUT
MWB
③
Flickerless
Flickerless OFF
Flickerless ON
Non display
FL
x23
⑥
⑦
Dx50
>> TELE
<< WIDE
Optical zoom
Digital zoom
zoom TELE
zoom WIDE
Non display
In case that ID is 0
ID : 002
In case that ID is 1 ~ 255
5.1 How to display Operating OSD
a. Pressing the MENU key sof tly conf irm current Operating OSD.
It is disappeared about f iv e seconds later if there are no other key actions.
b. When it zoom in or out pressing TELE(up) or WIDE(down) key ,
whole Operating OSD is display ed and then disappeared.
Press NEAR(+) , FAR(-) key , only upper part of Operating OSD
( f or display ing camera mode ) is display ed and then disappeared.
(It is f or checking current whole camera mode and zoom position )
c. Ev en though Operating OSD is disappeared,
it keep display ing ID in lower part of screen.
In order to do not display ID, one method is to change EEPROM data
of Camera, the other is to use external communication through RS-232C.
d. Using RS-232C communication, change display position of ID;
Bottom Right -> Top Lef t -> Top Right -> Non display .
* If display Operating OSD is not needed by special purpose
like using external text ov erlay board, it can be OFF mode at all times
through external communication control as RS 232C.
<Table5-1. Operating OSD description>
- 9 -
Содержание WDAC-2308X Series
Страница 30: ...8 Dimension CONT VIDEO POWER SVIDEO 29...
Страница 31: ...MEMO Printed in Korea G 110547 002...