Weldex High resolution digital BOX Camera, Руководство по эксплуатации

Страница: 11 / 12

9 Specification
Problems Troubleshooting
The WDR function is not working
Please check if the WDR Level is too low.
Please check if the AE Mode is set to MANUAL. The WDR doesn’t work in MANUAL
Exposure mode.
Colors are not quite right.
Please check if the camera is facing directly into sunlight or fluorescent light.
Please check if an auto iris lens is being used.
Please check the connection of the lens connector cable.
The Day&Night function doesn’t work
Please check if the AGC of EXPOSURE menu is set to OFF.
The Auto Day&Night Function doesn’t work in AGC OFF.
Image Sensor
Total Pixels
Scanning system
Scanning Frequency
Sync. System
Resolution
Min. illumination
Video Output
S/N Ratio
Exposure
1/3" SONY Super HAD CCD Ⅱ
2:1 Interlace
Internal
Max 600 TV lines in color
(650TV lines in B/W)
Color : 0.1 lux , BW : 0.05 lux (0 lux @ IR LED on)
1.0 Vp-p (75 ohm, composite)
more than 50dB (AGC off)
Shutter/Brightness/AGC/DWDR
DC / VIDEO / MANUAL
Off / Low / Middle / High
Off / On (0 ~ 35 steps)
Off / On
0 ~ 255steps
ATW1 / ATW2 / AWC / Outdoor / Indoor / Manual
Off / BLC / HLC
Area / Gain selectable
All Day / Night / (0~255 steps)
Auto / Color / BW / Ext
Level / Delay selectable
Burst off/on / IR Smart off/on (Gain/level selectable)
Dead Pixels Compensation
Title / MD / PM / Parking / Image / Comm / Language / Version
811(H) × 508(V) 795(H) x 596(V)
15.734KHz(H),59.94Hz(V) 15.625KHz(H),50Hz(V)
1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec
Lens
Gain Control
Shutter Speed
DWDR
Flickerless
Brightness
White Balance
BLC
BLC
HLC
Day&Night
Auto
BW
DPC
Special
NTSC PAL Model
Digital BOX Camera Installation Guide 20
Digital BOX Camera Installation Guide 21