WeldCraft Legacy LS1712R, Руководство пользователя

Страница: 6 / 20

OM-235 816 Page 4
SECTION 3 − INSTALLATION
3-1. Required Torch Parts And Torch Assembly
805 060-B
1 Cup
2 Collet Body
3 Collet
4 Heat Shield
5 O-Ring
6 Backcap
7 Torch Body/Torch Head
!
Before welding, insure that the torch
head is firmly attached to the torch
body.
8 Switch Assembly
9 Handle
10 One-Piece Power Cable
11 International Style Connector
.
Connector needed only if torch is
equipped with two-piece cable (see
Section 3-2).
12 International Style Flow-Through
Adapter
.
Adapter needed if torch is equipped
with one-piece cable.
13 14-Pin Plug And Cord
14 6-Pin Plug And Cord
Assembling Torch Body
Keep connections tight. Replace cup, heat
shield, and backcap as needed.
15 Tungsten Electrode (See Section 6)
Installing Tungsten
To adjust tungsten position, loosen
backcap.
1
2
3
4
13
5
9
6
15
11
7
10
12
8
14
3-2. International Style Connector Assembly
1 Weld Output Cable
2 Connector Body
3 Insulating Boot
4 Short Gas Hose
Slide power cable through insulat-
ing boot, and connect to connector
body.
Connect short gas hose.
805 092-B
Tools Needed:
1
2
4
3
9/16, 7/8 in.