Page 10
O P E R A T I O N
For all Inverters
Select the correct diameter electrode accordingly
to the thickness of the piece that you intend to
weld. (A table is located on page 13). Press the
side lever to open the clamp, insert the electrode
into the V-groove and release side lever. Ensure
that the electrode is correctly inserted inside the
electrode holder.
For all Inverters
To ensure earth has good contact, clean the work
piece with a wire brush. Attach the earth clamp to
the clean area to ensure good contact.
For all Inverters
Insert earth lead (earth clamp).
Insert electrode lead (electrode holder).
For all Inverters
Select amperage from the guide located on page
14 choosing the correct amperage required for
the electrode and material thickness.
For all Inverters
Switch machine on to start welding.
