Weldclass CutForce 41PA, Руководство по эксплуатации

Страница: 32 / 36

.
32 © Weldclass 2020 | E.&O.E.
13.4.1 Personal Safety
CAUTION! Keep the work area well lit. Make sure there is adequate space
surrounding the work area. Always keep the work area free of obstructions, grease,
oil, trash, and other debris. Do not use equipment in areas near flammable chemicals,
dust, and vapours. Do not use this product in a damp or wet location.
1. Stay alert, watch what you are doing and use common sense when operating equipment. Do
not use a tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of distraction when operating equipment may result in serious personal injury.
2. Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
13.4.2 Arc Rays can Burn Eyes and Skin
CAUTION! Arc rays from the plasma cutting process produce intense heat and
strong ultraviolet rays that can burn eyes and skin.
1. Use a Welding Helmet or Full Face Shield fitted with a proper shade filter (refer AS 60974-1,
AS/NZS 1337.1 and AS/NZS 1338.1 Safety Standards) to protect your face and eyes when cutting
or watching.
2. Wear approved safety glasses. Side shields are recommended.
3. Use protective screens or barriers to protect others from flash and glare; warn others not to
watch the arc.
4. Wear protective clothing made from durable, flame-resistant material (wool and leather) and
foot safety protection.
5. Never wear contact lenses while plasma cutting.
13.4.3 Noise Can Damage Hearing
CAUTION! Noise from some processes can damage hearing. Use AS/NZS
compliant ear plugs or ear muffs if the noise level is high.