EA
Clear – Replace Table.
E8
Find last (rightmost) occurrence of character and replace with RR, leaving the cursor
pointing to RR.
**Syntax = E8XXRR
E9
Replace up to 4 characters with RR.
**Syntax = E9XXXXXXXXE9RR where XX = HEX ASCII Character 00–FE
8300 Series Information and Examples
COMMAND
ACTION
COMMANDS continued
EE
Leading space suppress on. Suppress leading spaces from current cursor position
until first non–space character, leaving cursor pointing to first non-space character.
** Syntax = EE
EF
Delay function.
**Syntax = EFXXXX where XXXX = 0000–FFFF x 5ms delay.
Note:
For function code mapping, refer to pages 44 through 45.
DATA FORMATTER
EB
Sends selected portions of the data string out Aux port #1. This feature toggles off
and on. EB signals the 8300 to start sending data out aux port #1; when EB appears
again, the rest of the data is sent to the terminal.
EC
Sends 1 or 2 character MICR error/status code. This feature lets you designate
where the MICR error/status code should be placed in the data string. The setting of
output parameters – MICR error/status codes will determine whether 1 or 2
characters will be output.
**Syntax=EC
32
E7
Replace up to 5 characters with 5 different characters.
**Syntax = E7XXRRXXRRXXRRXXRRXXRRE7
Where XX = character to be replaced
RR = replacement character
XX and RR = HEX ACSII character 00–FE
Содержание SCANTEAM 8300
