Welch Allyn SCANTEAM 3700 Wedge, Техническое руководство

Страница: 74 / 100

11–2
SCANTEAM 3700 Wedge Technical Manual
Does the 3700 Wedge read your bar code incorrectly?
If the 3700 Wedge reads a bar code ( one beep for a good read ), but the
bar code is not displayed correctly on the host screen:
➊
The 3700 Wedge may not be programmed for the appropriate
terminal interface.
Example: You scan 12345" and the host displays @es%."
Reprogram the 3700 Wedge with the correct or Terminal Selection bar
code ( see Section 2, Quick Start Menu ).
➋
The 3700 Wedge may not be programmed to output your bar code
properly.
Example: You scan 12345" and the host displays A12345B."
Reprogram the 3700 Wedge with the proper Symbology selections
( see Section 5, Symbology Menu ).
The 3700 Wedge won’t read your bar code at all?
If the 3700 Wedge will not read your bar code:
➊
Try scanning the Sample Bar Codes ( found at the end of the Default
Charts section.
If the 3700 Wedge reads the Sample Bar Codes, check that your bar
code is readable. ( See Is the 3700 Wedge having trouble reading
your bar codes" on the previous page. )
If the 3700 Wedge does not read the Sample Bar Codes either,
continue to #2, below...
➋
If the 3700 Wedge won't read the Sample Bar Codes either:
Verify that the bar code symbologies are enabled. (
See Sections 5,
Symbology Menu. )
Verify that your bar code symbology is enabled. ( See Sections 5,
Symbology Menu. )
Scan the Default All... " bar code on each symbology menu page in
Section 5 to enable most symbologies. ( MSI and Plessey will have to
be enabled individually, as they are defaulted Off . )