Welch Allyn CareTemp Touch Free, Инструкция по применению

Страница: 23 / 30

Guidance and manufacturer's declaration
EMC compliance
Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC EN 60601-1-2:2014.
•
All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in this document, the Welch Allyn® OAE Hearing
Screener Directions for use .
• Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The device complies with all applicable and required standards for electromagnetic
interference.
•
It does not normally affect nearby equipment and devices.
• It is not normally affected by nearby equipment and devices.
• It is not safe to operate the central station in the presence of high-frequency surgical
equipment.
• However, it is good practice to avoid using the device in extremely close proximity to
other equipment.
Emissions and immunity information
Electromagnetic emissions
The Welch Allyn CareTemp™ Touch Free Thermometer is intended for use in the electromagnetic environment specified
below. The customer or user of the Welch Allyn CareTemp™ Touch Free Thermometer should assure that it is used in
such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11 Group 1 The Welch Allyn CareTemp™ Touch Free Thermometer uses RF energy
only for its internal function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11 Class B
The Welch Allyn CareTemp™ Touch Free Thermometer is suitable for
use in all establishments including domestic and those directly
19