Welcat CTR-800-11W, Руководство пользователя

Страница: 71 / 144

Chapter 4 Settings
4-18
Chap.
4
● SSID (ESSID)
SSID is a unique identifier used to allow a terminal (CTR-800-11W) and
an access point to communicate. Since a terminal can only communicate
with an access point with the same SSID, the risk of a third person
illegally accessing information is reduced a little. When the SSID of a
terminal is set to "ANY" (or with no characters set), the terminal
searches for any available access points automatically and tries to
connect.
Some access point settings may refuse "ANY" settings on
the terminal due to security reason. Refer to the access
point manual for details.
You can set two or more access points to have the same SSID on the
network. This allows roaming of a terminal only between the access
points with the same SSID.
4-6-1-2 Security Setup
1. From the System Menu, select "2:Network."
2. Then select "1:RF."
3. Then select "2:Security."
4. Then press the
key.
< Security >
1:WEP
2:AuthenMode OPEN
< Network Config >
1:RF 5:DNS
2:TCP/IP 6:SNMP
3:DHCP 7:MAC
4:FTP
< RF Setup >
1:Basic
2:Security
3:Advanced