10.
Welcare PureAir Desktop Air Purifier
Using the Air Purifier
Standby:
Insert the plug of the air purifier into a power source. The buzzer will sound, and
all the indicators will light up. After three seconds, the air purifier will be in standby
mode. The “power button” indicator lights up in
RED
.
Please note:
no other icons will light up.
Power On/Off:
Tap the top power icon to switch the power on. Tap again to switch the power off.
The default fan speed is low, and the child lock is off.
Fan Speed Function:
Tap the fan speed adjustment icon to choose fan speed - Low
High
Auto
Sleep
Sleep Mode:
When the sleep function is activated, the indicator lights will turn off except
for the sleep icon which will remain fully illuminated. The power and fan speed
icons will remain illuminated at half brightness.
Child Lock:
Press the icon for three seconds to switch the child lock on/off.
–
If the icon light is continuous, the child lock function is turned OFF.
–
If the icon light is flashing, the child lock function is turned ON.
Replace the Filter:
When the filter has been used for approx. 2,000 hours, the replacement filter
indicator light will flash, and the buzzer will beep.
After replacing with a new filter, hold the filter reset icon for three seconds until
the light fully illuminates and no longer flashes. At the same time, the buzzer
will stop sounding. This button can also be used to turn the air quality indicator
lights on and off (by pressing once).
Timer Function:
Touch the timer icon, adjust the countdown shutdown time 1hr
2hr 4hr
8hr. The sequence will then loop.
Note:
If no timer is set, the air purifier will continuously operate until it is
manually switched off.
Cleaning and Maintenance
• When cleaning, always turn off the power and disconnect from the
power source.
• Clean the product with a damp soft cloth and mild detergent if required.
• Dry with a soft cloth.
WPA100_Instruction-Manual_A5-working.indd 10
WPA100_Instruction-Manual_A5-working.indd 10
29/7/21 2:48 pm
29/7/21 2:48 pm
