AFTER SALES SUPPORT
Inserting batteries
21
USA
866-633-4660
USA
The device measures blood pressure by using a cuff around the wrist.
Inflating the cuff presses the arteries together so that no more blood can
flow through them. The values are determined while the pressure rises
in the cuff.
The device has electronic step valves that can detect even slight changes
during the measurement, which can be evened out using the cuff
pressure.
By increasing the pressure step-by-step, fluctuations in the cuff
are recorded by the device and included in the assessment. If no
fluctuations are recorded for a step, the air pressure is increased.
Inserting batteries
1. Squeeze the battery compartment cover together on both sides and
pull off toward the rear (see
fig. C
).
2. Insert two 1.5 V R03/LR03/AAA batteries. Pay attention in the process
to the polarity information in the battery compartment (the negative
terminal faces the spring).
3. Close the battery compartment lid again
4. Replace the batteries:
• if the battery icon
appears on the display.
• if the display fails to illuminate despite pressing the on/off button.
− Basic settings must be reset after changing the batteries.
CAUTION!
Risk of injury/damage to the device due to exploding
batteries.
− Always change both batteries at the same time! Never
use new and old batteries together or different types of
batteries.
− Rechargeable batteries are not suitable for operating this
device.
14942_MSN5004 9483 USA Aldi Content Final.indb 21
14942_MSN5004 9483 USA Aldi Content Final.indb 21
16.04.2015 07:58:46
16.04.2015 07:58:46