_______________________________________________________________________________________________________________________________
9 Cleaning procedures
Merrychef eikon
®
e2s Installation and User Manual
69
_______________________________________________________________________________________________________________________________
Rules for moving and setting up the wheeled trolley safely
To avoid hazards, the following rules must be observed when moving the wheeled trolley that carries the appliances
(optional accessory):
▪
Watch out for all connecting cables when moving appliances. Never wheel over the connecting cables. Never stretch let
alone pull off the connecting cables.
▪
The appliances must be disconnected from the electrical supply before moving the stacking trolley (optional accessory).
▪
The appliances must be left to cool down on the trolley before being moved.
▪
There must not be any food left in the appliances.
▪
The appliance door must be closed.
▪
Protective clothing must be worn if the appliance is mounted on a trolley.
▪
It is important to ensure that the unit is level once is back in place.
▪
Once the unit is back in place, the parking brakes must be engaged again.
▪
Whatever the position, care must be taken to ensure that the trolley carrying the appliance does not tip over.
Spraying down the appliance with water
DANGER
Risk of electric shock from live parts
Water on the exterior of the appliance can cause a short-circuit, which may result in electric shock on touching the
appliance.
Do not spray the interior and exterior of the appliance with water.
Always keep the USB cover closed during cleaning.
Hot surfaces
WARNING
Risk of burns from high temperatures on interior parts of the appliance
You may get burnt if you touch any of the interior parts of the cavity, the inside of the appliance door or any parts that are
or were inside the oven during cooking.
Before starting cleaning tasks, wait until the cavity has cooled to below 50°C / 122°F or use the Cool Down function to
cool the cavity.
Wear personal protective equipment.
Spraying water into a hot cavity
WARNING
Risk of scalding from hot steam
If water is sprayed into the hot cavity, steam will be produced that may scald.
Before starting cleaning tasks, wait until the cavity has cooled to below 50°C / 122°F or use the 'Cool Down' function to
cool the cavity.
Contact with cleaning chemicals
WARNING
Risk of irritation to skin, eyes and respiratory system.
Direct contact with the cleaning or protective chemicals will irritate the skin, eyes and respiratory system.
Do not inhale the vapours or spray mist from the cleaning and protective chemicals.
Do not let the cleaning or protective chemicals come into contact with skin, eyes or mucous membranes.
Do not spray cleaning or protective chemicals into a cavity.
Wear personal protective equipment.
