16
Part Number: 9294098 01/18
Installation
Section 2
Standard Cutting Board Bracket Mounting
1. Gather brackets, cutting board and screwdriver.
2. Open the door to install the center bracket.
3. Remove four screws from the nosing.
4. Place the bracket and secure with the four removed
screws.
5. Remove two screws from one end.
6. Place the bracket and secure with the two removed
screws.
7. Repeat at the other end.
8. Insert the cutting board into the brackets, back first. Lay
it down with the holes over the alignment pins.
Standard Bracket Adjustment
Slotted hole provides
adjustability of pin
for alignment with
cutting board holes.
To adjust, loosen
acorn nut on bottom
side of bracket.
Adjust pin position to
align with cutting board
holes, tighten acorn
nut.
