Welbilt Convotherm 4 easyDial 6.10, Руководство пользователя

Страница: 63 / 98

5.2.3 How to perform fully automatic oven cleaning using single-measure
dispensing
For your safety when cleaning
Before starting cleaning work, it is essential that you familiarize yourself with the rules and hazard
warnings specified in 'Safe working when cleaning' on page 60, and follow the instructions given there.
Prior knowledge required
You need to know these operations:
■
Opening and closing the appliance door safely 42
■
Adding cleaning agent from single-measure dispensing bottles to the cooking chamber 78
Requirements
■
You are sufficiently familiar with using the software to be able to select and run different cleaning
profiles; please refer to the Operating instructions for the combi oven.
■
No food has been left in the cooking chamber. There are no foreign objects in the cooking cham‐
ber.
■
All containers, baking trays, shelf grills and any other accessories have been removed from the
cooking chamber.
■
The oven drain is not blocked or clogged with any residues. The filter is fitted in place on the oven
drain.
■
The interior glass door of the appliance door is secured properly in place.
■
The suction panel is properly locked in place.
■
The appliance door is closed.
■
You have provided the necessary cleaning resources for your cleaning program; see 'Preparing the
cleaning agents' on page 59.
How to perform fully automatic oven cleaning using single-measure dispensing
1.
Select the cleaning profile and start the cleaning process.
2.
Wait for the soak cycle to finish (about 5 to 10 minutes
depending on the cleaning profile).
3.
■
An audible signal is given when the soak cycle is finish‐
ed.
■
You are prompted to add the cleaning agent.
■
The software displays for you the number of single-
measure dispensing bottles required.
4.
Open the appliance door.
5.
Add the cleaning agent from the single-measure dispens‐
ing bottles to the cooking chamber.
6.
Close the appliance door.
5 Cleaning procedures
User manual 63