Weka 606.3050.30.00 Скачать руководство пользователя страница 6

Страница: 6 / 44

Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.



Warranty terms of weka Holzbau GmbH

We guarantee the function of our products for 5 years from the date of delivery based on the following
conditions – however only on the wooden parts of our products (hereinafter weka product) and not on
connected components or parts of the weka product made of another material besides wood. Within
the warranty period defective parts or missing parts of the product or the product itself will be replaced
at our discretion. The warranty extends only to the free-of-charge replacement of the respective faulty
or defective wooden part. The warranty does not cover any consequential or additional costs, in
particular no delivery and installation or modification costs.

The warranty is void in case of:

failure to follow the assembly instructions,

changes (additions or modifications) made to the product diverging from the assembly
instructions,

load limits (e.g. snow load, etc.) having been exceeded,

the weka product having been installed on an incorrect foundation or floor plate, etc., in
particular in case of violation of the rules of architecture,

lack of or insufficient care of the wood (maintenance measures such as preservation or
painting of the wood),

wind speeds stronger than force 7 (moderate gales), natural catastrophes or brute force
having caused the damage to the weka product,

the deficiency consisting in changes which are typical for wood, such as discoloration,
formation of cracks, warping, shrinking, swelling or similar normal effects on the material
"wood".

Warranty claims must be accompanied by the original packing slip and the original sales receipt and
must be submitted within the warranty period in writing or by fax or e-mail. A further prerequisite for a
claim is the immediate notification of the defect or damage in the form of pictures and a written
description of the defect.

Address all warranty claims to:

weka Holzbau GmbH, Johannesstraße 16, 17034 Neubrandenburg
Fax: 0395/42908-83; E-mail: [email protected]

NOTE! For retrofitting of wall elements, equipment and storage rooms, or other wall coverings,
constant and full-surface ventilation underneath the roof panels is required, as otherwise heat
may be built up and the roof panels damaged.
For this, a minimum distance of 20 cm up to the roof panels must be ensured.

NOTES – ROOF TILES

•

Prior to mounting, the roof tiles are to be stored undercover and out of direct sunlight. This applies
in particular to white foils. Heat may build up under a stack of tiles leading to distortion and
discoloration of the tiles due to the burning glass effect.

•

Roof tiles must not be mounted in temperatures below +5°C or above 30°C.

•

In order to guarantee the impermeability of your car port, silicon is to be used when laying the roof
tiles (not included in the delivery), see page 21.

•

The roof tiles are to be pre-drilled with holes with a diameter = 10mm.

•

Please note that the tiles are to be screwed into place on the front and back purlin on every 2nd
wave, on the centre purlins on every 3rd wave. Figure page 21

•

Use the spacers (item 16) according to the figure on page 21.

•

Please note that the screws are not to be screwed down too tightly in order to guarantee the
function of the tiles.

•

Note: No false floor may be installed or thermal insulation provided below the roof tiles. There
must be adequate ventilation beneath the roof tiles.

•

Ab einer Schneehöhe von 34 cm ist das Dach zu beräumen.