Weka Holzbau 394.1613.20402, Инструкция по сборке

Страница: 9 / 48

Techn. Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.

Copyright HRB 3662
9
2.2. Warranty conditions
The item is covered by the statutory warranty (24 months). Within this period, any faulty parts will be replaced
free of charge. Weka will not pay any subsequent assembly or installation costs. Damage is
fundamentally
excluded from the warranty when
- the
weka product
does not have the correct base (foundation or otherwise), even
if the errors are minor,
- has deviated from the respective assembly instructions,
- wind speeds in excess of force 7, natural catastrophes or other violent events
occur
- the specified load limits (e.g. snow load etc.) have been exceeded,
-
any
changes (additions or rebuilding) have been made to the product as compared
with the assembly instructions,
- the wood has received insufficient or no care (maintenance: wood protection
agent, wood stain etc.).
A causal association with the damage is
not
generally required. Colour changes typical of wood, cracking,
warping, shrinkage, swelling or similar normal changes deemed to be natural characteristics of wood, and their
consequences, are expressly excluded from the warranty. Further claims and consequential damage are not
generally covered by the warranty conditions. Components made from
materials other
than wood are covered
only by the statutory warranty provisions and other statutes; they are
not
covered by the warranty.
Damaged or defective parts must be rejected
prior to installation
or the warranty claim will otherwise be void.
2.3. Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau
GmbH will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating them
with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical
connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article
or the individual parts over a distance greater than 5 m or to another level is not included in the assembly price
quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 ‘Level tolerances in building construction’, tab.
3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before assembly
begins. The substrates/floors/foundations constructed or selected by you must be suitable for the assembly.
3. Identification
3.1. Product mark and model designation
Wooden shed in Nordic spruce with 19 mm wall thicknesses
General

All wood parts in Nordic spruce
Wall assembly

19 mm Wall element
Door

Solid door with Safety clasps with eyelet
Roof

19 mm thick Fixing platen to study roof purlins, roof covering in bitumen roof paper.