6
3 Technical description
3.1 Permissible applications
The Weishaupt oil burner WL10 is suitable for:
•
heat exchangers complying with EN303-2 or
DIN4702-1
•
for warm water installations with intermittent or
continuous run (combustion manager switches off
once in 24hrs.)
•
air heaters
Any other use is only permissible with the written
agreement of Max Weishaupt GmbH.
•
The burner must
only
be operated with oil to DIN
51603-EL-1, fuel oil EL to ÖNORM-C1109 or stan-
dard fuel oil, Euro quality to SN 181 160-2 or prefer-
ably Öko fuel oil, CH quality to SN 181 1602
•
Permissible ambient conditions see Ch. 8.5
•
The burner must
not
be used outside. It is only suited to
inside operation.
•
The burner must
not
be used outside of its capacity
range (see capacity graphs, Ch. 8.2).
•
To ensure low emission combustion heat exchangers of
the three pass principle and combustion chamber
dimensions to EN 267 are recommended.
Type designation:
Typ
W
L
10 /2
-C, vers. Z
Two stage
Construction type
Ratings range
Size
L = Fuel oil EL
Weishaupt burner type W
Note:
The burner in its delivered condition is not
factory pre-set, and requires to be
commissioned.
