A S S E M B LY I N S T R U C T I O N S
L O F T T A B L E
Figure 5:
The table top can be aligned horizontally using the adjuster.
5
Страница 1: ...with hexagon socket M8 x 20 mm 2 x Allen key 5 mm ASSEMBLY INSTRUCTIONS L O F T T A B L E Figure 1 Place the table upside down on a level surface Screw the legs together as shown and slightly tighten the screws To do this use 4 x cylinder head screws with hexagon socket M8 x 16 mm 4 washers Figure 2 Now screw the adjuster for the table top into the center fixture 2 1 ...
Страница 2: ...n the table legs and screw them tight as shown in the diagram To do this use 8 x connecting sleeve M8 x 20 mm 16 x countersunk screws with hexagon socket M8 x 20 mm Figure 4 Check that the adjuster for the table top is in the right position in the x shaped support bore hole in the centre of the x Finally tighten all screws 3 4 ...
Страница 3: ...ASSEMBLY INSTRUCTIONS L O F T T A B L E Figure 5 The table top can be aligned horizontally using the adjuster 5 ...
