A S S E M B LY I N S T R U C T I O N S
L O F T T A B L E
Figure 3:
Now insert the x-shaped support into the recesses provided for this purpose in
the table legs and screw them tight as shown in the diagram.
To do this, use: 8 x connecting sleeve M8 x 20 mm
16 x countersunk screws with hexagon socket M8 x 20 mm
Figure 4:
Check that the adjuster for the table top is in the right position in the
x-shaped support (bore hole in the centre of the x). Finally, tighten all screws.
3
4