２４
4. Installation:
This series of cutter is small, light and portable. They will be more convenient when being
placed on the trolleys. Ensure the location where the cutter is to be placed is even.
ACUT series of cutters wire diagram as Figure 5:
Figure 4: Connection Chart for WP series
1.
3-phase 380V power source
2.
Gas hose
3.
Air compressor
4.
Cutting torch
5.
Output cable
6.
Workpiece
The max gas pressure of optional air compressor should be 0.8 Mpa and gas flow rate be no less
than 250L/min.Connect air compressor to inlet of air gauge on the rear panel of cutter. Turn on air
compressor to let gas pressure climb up to proper value for cutting. Then turn on air switch on the
rear panel of the cutter.
