19
2.3.6 Dip Switch
20
SW1
21
SW2
22
SW3
23
SW4
24
Mode
25
ON
26
OFF
27
OFF
28
OFF
29
Touch Screen Calibrate mode
30
OFF
31
ON
32
OFF
33
OFF Hide MT8000 System Setting Bar
34
OFF
35
OFF
36
ON
37
OFF
38
Boot Loader mode
39
OFF
40
OFF
41
OFF
42
ON
43
Reserve
44
OFF
45
OFF
46
OFF
47
OFF
48
Normal
z
Touch Screen Calibrate and Reset Password mode: In
this mode when you power on the MT8000 series, the
screen will display a “+” sign upper-left of the screen.
Use a stylus or finger to push the center of the “+”
until it moves. The “+” moves to upper-left,
upper-right, lower -left, lower-right and center. When
all five “+” are done the “+” will disappear. The
Touch Screen parameter will be stored in Flash Rom.
6
ips
nd
z
If losing or forgetting system passwords, users can
set Dip Switch 1 to “ON” position, the rest of D
remain on “OFF” position and then reboot MT8000
series. Under this situation, MT8000 series will jump
to Touch Adjust (Touch screen calibration) mode.
After calibration, the pop-up window appears as the
illustration below. Users will be inquired if restoring
the system password to the default value.
z
When “YES” is chosen, another pop-up dialog
appears as below. Users will be confirmed again if
restoring the system password to the default value
and will be asked to input “YES”. Then click OK.
(The default password is 111111. However, other
passwords, including download, upload password a
History backup password, have to be reset.)
Note: When the reset action is be taken, projects and saved data in the HMI will all be cleared.
2.4 CE Requirements
55
EU directives that apply to the MT-600/8000 Series:
z
EMC Directive ((2004/108/EC) electromagnetic emissions and immunity.
z
UL508
（
ISBN 0-7629-0404-6
）
machine safety for use in Pollution Degree 2 Environment.
z
MT600/8000 products will be CE-marked to indicate compliance with the EMC Directive.
The MT-600/8000 Series has been designed to operate satisfactorily in electromagnetic noise (immunity) and
without emitting high levels of electrical noise into the environment (emission). The units are designed to
meet European Community standards when installed per the wiring instructions in this manual.
