cMT-FHDX User Manual
UM021004E_20210513
3
Connector pin designations
1.2
PIN#
COM1 RS-232
COM2 RS-485
COM3 RS-485
2W
2W
4W
1
Data+
2
RxD
3
TxD
4
Data-
5
GND
6
Data+
RX+
7
Data-
RX-
8
TX+
9
TX-
USB Host port
1.3
USB 2.0 full speed host interface supports USB mouse devices, keyboards, printers, barcode
scanners, and USB disks. While using an external hard drive, please use an external power supply.
Do not use USB port to charge external devices.
Ethernet port
1.4
The unit has one 10/100/1G Ethernet port and one 10/100 Ethernet port.
The LED indicators on the Ethernet ports indicate:
Orange LED: LAN link status
Green LED: Active status
DIP switch
1.5
Each HMI is equipped with a reset button and a set of DIP switches. When using DIP switches to
change modes, the corresponding functions will be triggered.
SW1
SW2
Mode
OFF
OFF
Normal mode
ON
OFF
Hide HMI System Setting Bar
OFF
ON
Update OS
ON
ON
Restore factory default
Note:
Reboot HMI after adjusting DIP switches to enter the corresponding mode.
Содержание cMT-FHDX
Страница 1: ...0 User Manual cMT FHDX Startup Guide...
