Nameplate
The nameplate is located on the
back of the handheld remote
control (see Fig. Changing the
Battery).
Approved Use
The WeiTronic Remoto 1 hand-
held remote control is solely
designed for the purposes of
controlling sun protection sys-
tems such as lamella outdoor
blinds, roller blinds, and jointed
arm and vertical awnings.
Technical Specifications
Nominal voltage
3 V DC
Battery type
Coin cell 2430
Protection class
IP 20
Ambient temperature
–10 °C to 55 °C
Radio frequency
868.3 MHz
Dimensions
118 x 53 x 21 mm
Weight
80 g
Operating Mode
• Manual operation: manual commands
such as
,
,
are selected by pressing
the relevant button.
Transmission Check
The channel display doubles up as the
transmission check. Should a radio signal
be received, this will be signalised. Should
the battery performance run down, the
brightness of the display will dim and the
frequency range will drop. If the control
lamp stop flashing when a button is
pressed, the battery will need to be
replaced.
Automatic Wind Control
When there is a risk of high winds, the sun
protection system will retract and remain
shut down for approx. 15 minutes. Should
the
or
button be pressed during the
shutdown period, the product will move
very slightly to signal that the system is
still shut down. Please note: The automatic
wind control cannot be deactivated.
Lux
and
Tempura
Jointed arm awnings are also available as
extras with lighting (Lux) and heating
systems (Tempura).
• To activate these options, press the
or
button (for less than 1 second).
• Hold the
or
button down to dim
the lighting.
• Press the
button to switch off either
the lighting or the heating.
Handheld Remote Control
WeiTronic Remoto 1
Operating Instructions
㛯㛯㛯
www.weinor.com
(1) Channel display
(2)
Up On/Brighten*
(3)
Stop Off*
(4)
Down On/Dim*
(5) Rocker button Up
Brighten*
(6) Rocker button Down
Dim*
* Lux, Tempura
