weinor WeiTronic Combio-868 HD 1.5 kW, Инструкции по эксплуатации и монтажу

Страница: 40 / 84

Programming brightness levels
The factory default settings for the Combio-868 LD brightness
levels are set at 100 % and about 50 % and can be called up with
a quick double click on the UP or the DOWN button. The stored
levels can be reprogrammed easily.
1. Switch the remote control unit to the channel for lighting.
2. Use the dimmer to go to maximum or minimum.
3. Press the UP or DOWN button until the desired level of bright-
ness has been reached.
Important:
Keep the UP or DOWN button pressed until the desired level
of brightness has been reached!
4. As soon as the desired level of brightness has been reached,
also press the STOP button. The dimming process will stop and
the new level will be stored.
40
Technical data
• Voltage 230 V
• Frequency 50 Hz
• Maximum installed load 350 W
• Protection type IP 54
• Permissible ambient temperature – 20 to + 70 °C
• Radio frequency 868.3 MHz
• Primary connection AMP plug for fitting into
Secondary connection various weinor Lux
systems
• Max. number of sender units 5
• Programmable levels of brightness 2