weinor WeiTronic Combio-868 HD 1.5 kW, Инструкции по эксплуатации и монтажу

Страница: 36 / 84

6. Lay the Combio-868 MA mains lead and shorten as necessary.
The electrician should then connect the lead to the mains
supply properly.
7. Fix the Combio-868 MA remote control receiver to the awning
or the wall.
8. Turn on the mains supply again.
9. If the Combio-868 MA has been paired with a re-mote control
unit before delivery, now check that they work. If not, pair the
remote control unit (see item 10).
To check, set the remote control unit to the cor-rect channel.
When operating, check that the awning moves in the right
direction by pressing UP and DOWN.
10. If the unit has to be paired, proceed as follows: (Further
directions in the programming instructions in the appendix.)
a. Set the remote control unit to the chosen channel (see
remote control unit operating instructions)
b. Disconnect from mains supply; then connect again
c. Start the programming mode by pressing the programming
button on the WeiTronic remote control unit briefly
36
Button UP awning retracts (into casing)
Button DOWN awning opens into sun
protection position