weinor Semina, Варианты установки

Страница: 18 / 20

18
Semina extraction forces
Width
in cm
Projection in cm
150 200 250 300 350
250
932 1979 1955
466 990 978
233 495 489
270 400 568
300
1076 1595 2257 2971
538 798 1129 1486
269 399 564 743
312 462 654 862
350
1220 1811 2560 3372 4399
610 906 1280 1686 2200
305 453 640 843 1100
354 526 742 978 1276
400
1364 2028 2862 3773 4912
682 1014 1431 1887 2456
341 507 716 943 1228
396 588 830 1094 1424
450
1508 2244 3164 4174 5425
754 1122 1582 2087 2713
377 561 791 1044 1356
438 650 918 1210 1574
500
1652 2461 3466 4575 6736
826 1231 1733 2288 3368
413 615 867 1144 1684
480 714 1006 1326 1954
550
1796 2677 3768 5533 7331*
898 1339 1884 2767 3666
449 669 942 1383 1833
520 776 1092 1634 2126
600
1940 2894 4070 6095 7927*
970 1447 2035 3048 3964
485 724 1018 1524 1982
562 840 1180 1768 2298
650
2085 3110 4925 6558 8522*
1043 1555 2463 3279 4261
521 778 1231 1640 2131
604 902 1428 1902 2472
700
1486 2217 3514 4680 6079
743 1109 1757 2340 3040
372 554 879 1170 1520
430 642 1018 1358 1762
Rawlplug extraction forces
Non-compression-proof assembly base
Extraction forces for rawlplugs in N per upper fixing located close to an arm
* 2 standard wall brackets (85 mm) per arm required
1 standard wall bracket (85 mm)
1 standard wall bracket (85 mm)
per awning arm
fasteners: 2 per bracket
1 standard wall bracket (85 mm)
2 standard wall brackets (85 mm) per
awning arm
fasteners: 2 per bracket
or
1 wall bracket (260 mm) plus
1 standard wall bracket (85 mm)
as a central bracket,
1 wall bracket (260 mm)
per awning arm
fasteners: 10 in all
1 wall bracket (260 mm) plus
1 standard wall bracket (85 mm)
as a central bracket,
2 wall brackets (260 mm)
per awning arm
fasteners: 10 in all
Mounting plate (240 x 280 mm)
incl. 1 standard wall bracket
(85 mm),
Standard wall bracket (85 mm)
incl. base plate
fasteners: 4 in all
The extraction force is the force with which the
weight of the awning and the wind load pull on
each upper fi xing. The tables indicate this force
in N per upper fi xing. It varies depending on the
awning size and the wall bracket / mounting
plate used.
Selecting the wall bracket and anchoring
system:
1. Consult relevant table for extraction force per
fi xing for selected awning size.
2. Select a wall bracket/mounting plate for
which there is a fastener which can resist the
indicated extraction force. Remember to take
into account the spacing, the area which willl
be damaged if the fi xing breaks out, the type
of fi xing used and the assembly base.
See separate bracket overview for other bases.