EN | 9
8 | EN
Instructions for radio operation
CAUTION!
Observe the following safety instructions for radio
operation!
Only use radio systems, if they are allowed and can
be operated without interference.
• Please note that radio systems must
not
be oper-
ated in areas with an increased risk of interference
(e. g. hospitals, airports, ...).
•
The remote control is permitted only for devices and
equipment for which a malfunction of the transmitter
or receiver does not give rise to a hazard to persons,
animals or objects or where this safety risk is covered
by other safety equipment.
•
The operator has no protection whatsoever against
interference by other telecommunication installations
and local terminals (e. g. also from radio installations
which are operated properly in the same frequency
range).
•
The range of the radio signal is limited by the govern-
ment and the built environment.
Safety instructions for radio operation
Mounting of the wall bracket
1. Attach the bracket to the wall, with the two wall plugs and
screws which are provided.
2. Slide the
BiEasy 1MW-3V
from the top onto the wall bracket.
NOTE!
Before installation in the required assembly position,
check that the transmitter and receiver are function-
ing properly.
The bracket has to be fixed so that the drill hole does
not touch any electrical lines.
Mounting of the wall bracket
