Weinmann & Schanz Bellavista 90 847 89, Руководство пользователя, Страница: 31 / 278

28
GB
29
SETTING THE CURRENT DAy AND TIME
Before setting the custom programme, make
sure the time and day of the week are set cor-
rectly. If this is not the case, press the ”Mode”
key until the icon is displayed.
Then press the “Mode” key again and hold
it down until the number indicating the day
flashes.
Adjust the day of the week by using the “+“
and “-“ keys (1=MON, 2=TUE,…7=SUN), then
confirm by pressing the “Mode“ selection key.
The hour starts flashing. In the same way, adjust
the hour by using the “+“ and “-“ keys and con-
firm with “Mode“ selection key.
Repeat the same procedure for the minutes.
With the “P4” program, you can set different temperatures
(”Comfort” and ”Night/Eco”) over a 24 hour period for each
day of the week.
Press the “Mode“ key to confirm and repeat
the same procedure for each day of the week.
The weekly program is now set, the appliance
emits an acoustic signal for confirmation.
T Night/Eco T Comfort T Comfort T Night/Eco
0h 2 4 6 8 10 12 14 16 18 20 22 24
FUNCTIONS
The appliance has a number of special functions to customise
and optimise use.
SETTING THE PROGRAM
Now an hourly sequence can be set for each day. Start with
the first day. Choose by means of the “+” and “-” keys, for
each hour, between the “Comfort” temperature (full bar) and
the “Night/Eco” temperature (empty bar).
OvERDRIvE (2h)
The “Overdrive (2h)” can be used to heat the room quickly.
Press the “2h” key to start the “Overdrive (2h)“.
The function cannot be activated when the
appliance is in “Standby”.
The temperature set point disappears from the display of the
remote control.
The appliance heats at the maximum power for 2 hours, in-
dependently from the temperature setting.
To deactivate the “Overdrive (2h)” function at any time, press
the “2h“ key again, the “Mode” key or the “Standby” key.
The “Overdrive (2h)“ is set to stop automatically after 2 hours
anyways.
ASC
The “ASC” function cannot be activated or deactivated on
the remote control (see Ch. 4.3.1).
OPEN WINDOW
The “Open Window“ function cannot be activated or deacti-
vated on the remote control (see Ch. 4.3.2).
HOLIDAy
The “Holiday“ function cannot be activated or deactivated
on the remote control (see Ch. 4.3.5).
CHILDREN SAFETy
To activate the function, press the “+” and “-”
keys together and hold them both down until
the icon appears on the display.
To deactivate the function, repeat the same
operation.
”Children Safety” can be activated in all operating modes,
including “Overdrive (2h)”. The function cannot be activated
when the appliance is in “Standby”.
DISABLE DISPLAy BACKLIGHTING
The display backlighting can be disabled if not required.
To disable the backlighting, press the “ ” and
”+” buttons together and hold them down until
”LEd OFF” is shown on the remote control display.